Rotary KilnMeet Stricter Emissions Requirements With a Rotary Kiln

HiTemp Technology has more than thirty-five years of experience with the design, manufacture, and installation of combustion, gasification, heat recovery and process heating systems.

Thermal Oxidizer | HiTemp TechnologyThermal Oxidizer Types - Which is Best?

A thermal oxidizer, also known as a thermal incinerator, is a process unit that reduces air pollution in many industrial facilities by decomposing hazardous gases at a high temperature prior to releasing them into the atmosphere...

dual-hearth process furnaceHiTemp Technology Announces New Website Launch

Ringoes, New Jersey: On December 31, 2017, HiTemp Technology (HTT) unveiled a completely redesigned and rebranded website at The website was a highly-anticipated project and is expected to provide users a clean, uncluttered design that incorporates improved functionality and enhanced content...

Rotary KilnRotary Kilns vs. Rotary Dryers: What’s the Difference?

To the layman, the term ‘thermal processing’ might not mean much, but the truth is that everybody in the developed world has benefited from it in some way. It is responsible for much of our canned goods, for example. Thermal processing on an industrial level is also heavily involved in the production of cement, lime, titanium oxide, and other substances.

control panelLower Your Costs with a Catalytic Oxidizer

Thermal and Catalytic Oxidizers destroy Hazardous Air pollutants (HAPs), Volatile Organic Compounds (VOCs) and odorous emission that are often discharged from industrial and organic processes. Through the process of catalytic oxidation, it converts the pollutants to much safer carbon dioxide and water vapor. A catalytic oxidizer, also known as a Catox Incinerator, is a type of oxidation system that is similar in function to a thermal oxidizer but uses a catalyst to promote oxidation at lower temperatures.

catalytic oxidizerComparing Fuel Costs of Regenerative Catalytic Oxidizers versus Regenerative Thermal Oxidizers

The emission control industry appears to have created a stream of misinformation and untruths concerning the fuel cost comparison between RTO and RCO systems. Simply put, they do not tell customers that natural gas at 1600oF (870oC) has half the heat value than it does at 70oF (21oC). Customers pay for FT3 of natural gas, not BTUs. So when suppliers calculate a 1,000,000 BTU operating cost it is really a 2,000,000 BTU operating cost.